How to Do a Ghost Immobiliser Install
The ghost immobiliser is a sophisticated anti-theft device. It uses data networks from CAN to stop your vehicle from being stolen and operates silently, without radio frequencies.
Before you begin a ghost immobiliser install, it is vital to grasp the operational dynamics of the device. A thorough understanding allows you to navigate the installation process without difficulty and maximize its capabilities post-installation.
Identifying the Wires
Ghost immobilisers are cutting-edge security system that is designed to guard your vehicle from theft. It utilizes advanced technology to prevent your car from starting until you enter a particular pin sequence. Installed discreetly in your car, the device will reduce your insurance rates. It's perfect for those who drive expensive or high-performance vehicles who want to safeguard their pride and joy from thieves.
The system is connected to the engine controller unit using CAN. This makes it difficult for thieves to disable or remove the immobiliser. It does not transmit radio frequencies, and it operates silently. The immobiliser is secure and does not require keys or LED indicators to function. It can be used to protect your car from being taken even if the keys have been copied.
It's important to be prepared for the eventuality that you'll need to take out the ghost immobiliser in the near future. To do this you'll need to familiarize yourself with the wiring system inside your vehicle. You should also wear safety gloves and work in a well-ventilated area. Disconnect the wires from your immobiliser using wire cutters or strippers. Label each wire to ensure that you can identify the connection if needed.
You should be aware that getting rid of the Ghost Immobiliser is not for the faint-hearted. It requires a great deal of patience and attention to detail. If you are willing to put in the effort, it could be an extremely effective method of vehicle protection. You can hire a professional to install the ghost immobiliser, and they will also offer regular updates to the software to address security flaws and improve the system's performance.
Disconnecting the Battery
Ghost immobilisers are an excellent way to safeguard your vehicle from theft, but it can drain your battery if properly installed. The device has to be connected to the vehicle's electric system, which involves working with wires or removing the factory components. It is therefore essential to hire a professional technician to install the device and follow instructions from the manufacturer. You could cause damage to your vehicle which will require costly repairs or the replacement of your battery.
A TASSA-certified technician will employ the most effective tools for the job, which includes an diagnostic scanner that will verify the vehicle's wiring is working properly and in good order. They will also be aware of the specific specifications for your vehicle model. They'll be able to identify the vehicle's wiring and work on it without harming the original system. They will also be able to install the Ghost immobiliser in a discreet manner so that it doesn't interfere with the appearance of your vehicle's interior or exterior.
The process of installation can be complex, and it is crucial to take your time. Before starting the project, it is important to read the instructions and work in well-lit areas and wear appropriate safety gear. This will help you avoid making mistakes and ensure your safety and that of the people around you while working with electrical and mechanical components.
After you have removed the battery, you should identify a source of constant power and an area for grounding. It is recommended to mark these points by using labels or tape to facilitate the process of connecting and disconnect them later. It is also a good idea to use a multimeter test the power supply to ensure that it is able to provide a constant 12V output.
Making Connections
Installing a ghost immobiliser takes a great deal of time and attention. It involves working with delicate electrical components and a lot of wires, so it is crucial to take your time. Wear safety gear, such as protective gloves and eyewear. Work in a space with adequate lighting.
After you have thoroughly examined the wiring of your vehicle and identified the CAN H/CAN L wires, it's now time to connect them. It is recommended to use high-quality connectors to ensure a strong and solid connection. It is important to ensure that the connections are protected from damage and accidental disconnections.
The Ghost immobiliser is a highly effective tool that helps to prevent car theft by making it difficult for thieves to get started and drive the vehicle. It works by preventing the engine from running until the correct PIN code is entered, a beacon is present or the WeCar mobile app issues a command. This system lets you remotely disable or lock the system remotely. It is ideal for those who change vehicles frequently or for those who use their vehicle to perform service work.
The Ghost immobiliser differs from conventional immobilisers that rely on keys or codes in order to shut down the engine. It uses complex algorithms which are almost impossible to hack. If Ghost 2 immobiliser is installed in a secure area, thieves won't be aware of its presence. It can also be used in conjunction with the GPS function that will send you notifications whenever your vehicle leaves its designated parking space and allows you to locate and track it. You will be notified via phone in the event that someone attempts to break in to your car.
Insulating the Connections
Ghost Immobilisers are among the most advanced in security technology for vehicles. They connect directly to the CAN data system in your vehicle and stop the engine from starting unless you enter a PIN number. This sophisticated device is discrete and doesn't require the installation of key fobs or other security systems, making it a popular option for drivers who wish to protect their vehicles from theft.
When installing a Ghost Immobiliser, it is important to follow the installation instructions carefully to ensure accuracy. To avoid the possibility of a system failure, make sure you double-check the location and identification of the CAN L and CAN H wires prior to you begin the installation. It's also recommended to label these wires, or use tape to mark them during the installation process, since it is easy to lose the wires in the wiring loom. It is also essential to identify a power source with a constant 12V supply and test it with a multimeter to ensure that the Ghost Immobiliser will receive consistent power.
The wires must be protected for preventing any electrical damage. This can be accomplished by wrapping the exposed wires in insulation or soldering them to make a reliable connection. To avoid mistakes, it's important to use high-quality soldering tools and cover your work space.
After the Ghost Immobiliser has been installed it is able to be paired with a compatible tracking system or alarm to provide a higher level of vehicle security. This can help in the prevention of theft as well as recovery as the tracking system alerts police in the event of attempts to tamper or start the vehicle.
Connecting the battery
To ensure that no wires could cause an accident-related short circuit make use of electrical tape to connect and insulate any damaged wires. Re-solder any connections. After re-inserting your battery, you must test the immobiliser and vehicle's ignition system to ensure all components are functioning properly.
If you have any issues with a ghost immobiliser install it is best to seek out an expert. They will be able to assist you in determining the issue and determine the best solution.
The Ghost Immobiliser is a fantastic way to safeguard your car from theft since it will prevent the engine from starting without authorization and keep thieves off their tracks. It is also indetectable to thieves who use diagnostics or code-grabbing technology, since it doesn't utilize any radio frequencies.
A Ghost Immobiliser shouldn't drain your car's battery in any significant way. It draws only a small amount (around 8mA) of energy, so it shouldn't have any effect on the performance or function of your vehicle. However, if the device isn't installed correctly or encounters issues it could draw more than is necessary and drain the battery.
Spending the time to meticulously complete a ghost immobiliser install will significantly reduce the likelihood of experiencing issues later on. It is crucial to read the manual for your particular device and consult online resources for more assistance. This will give you the necessary tools and information to complete a professional install. The added security and peace of mind that Ghost Immobiliser offers is well worth it.